Cylinder Block for 2013 Ram 1500
Short Block Engine
SERVICE WARNING: If The Original Engine Has Experienced A Catastrophic Failure - Including Piston, Cylinder Bore, Valve, or Valve Seat Failure -The Intake Manifold Must Be Replaced With A New Manifold.
Oil Galley Block Off. Mega Cab. [.375x18x1.343]. Oil Gallery Block Off. [.375-18x1.343]. [.375x18x 1.343]. Lifter Gallery. [.375x18x1.34].
All Plugs And Dowel Pins Must Be Installed On Cylinder Block Before Installing Engine. Item 13 Also Contained in Short Block Engine Kit. Mega Cab. Cylinder Block To Transaxle. Block To Transmission. Cylinder Block To Head. Engine Block To Clutch Housing.
[m47.93 od 6.4 thk 51.5 flg od]. Lifter Yoke To Cylinder Block. Mega Cab. Camshaft. [.415x.28].
Cylinder Block to Clutch Housing. Block To Head. [.25x.75]. Or Transmission Housing. Cylinder Block to Transmission. 1/2 x 3/4.
Dowel Pin, Mounting
Block to Crankshaft Seal. Rear Crankshaft Seal Retainer. Rear Oil Sear Retainer. Rear Oil Seal Retainer. Front Cover To Cylinder Block. Carrier balance shaft. Also Serviced In Item 4 Retainer Package. Rear Retainer To Engine Block. [m8x10.0].
M6x1.00x28.00. M6x1.00x24.00. M6x1.0x24.0. Rear Mail Oil Seal Retainer To Crankshaft. Rear Cranshaft Oil Seal Retainer To Cylinder Block.
Plug, Right And Left
After 6/14/04. After 4/26/04. Mega Cab. Coolant Drain [.25x18x.69]. 0.250-18x.690. Cylinder Block Water Jacket Drain. Oil Gallery, Front. Right And Left Cylinder Block Coolant Drain.
Main Bearing Cross. Bearing Cap To Engine Block. Main Bearing Cap Side Bolt. [M8x1.25x45.00].
Dowel Pin, Mounting, Front
M8x10.00. Mega Cab. M8x10.0. Front Timing Cover.
Crankshaft Sprocket. Mega Cab. Crankshsft Sprocket. M4.788x27.5.
New Part Number For 2013. Not Interchageable With 2012 And Below Crankshaft. Not Interchangable With 2012 And Below Crankshaft.
Automatic Transmissions. Installation. Also Serviced in Crankshaft Assembly. Crankshaft Pilot.
M12x1.75x91.50. M12x1.75x89.10. M12x1.75x91.2. Bearing Cap To Engine Block. For Main Bearing Cap. [M12x1.75x91.5]. Main Bearing Cap To Engine.
M12x1.75x1.25x152.10. M6x1.00x18.00. M12xm8. M12&M8; Oil Pickup Tube To Main Bearing Cap.
M6x1.00x20.00. M6x1x20. Mega Cab. Cylinder Block Heater. Block Heater to Block. Quad Cab. Regular Cab.
Includes Mounting Hardware. Engine Block Heater To Cylinder Block.